Baileigh Industrial DP-1200VS, Operator'S Manual

Page: 18 / 40

16
16
Drill Head
The drill head attaches to the top of the column. It
houses the motor, spindle, controls, and transfer
mechanisms. Attached to it is the electrical enclosure,
the protective guard, the work light, and the coolant
valve with nozzle.
Work Table
The sturdy work table can be positioned at varying
heights and rotated 180° in either direction. It has T-
slots to allow the use of 5/8” or M16 bolts. At the
back-right side of the work table is the crankshafts.
The crankshaft (A) controls the up /down motion of
the table. Always unlock the table with clamping nut
(not visible in this picture.) at the back of the column,
before changing the height or rotating it. Then lock
the work table to secure in position.
Machine Base
The sturdy machine base supports the entire
machine as well as provides a secondary work table.
It has T-slots to allow the use of 5/8” or M16 bolts.
Coolant Pump and Tank
The coolant pump and tank are free standing and
may be positioned as needed within the length of the
power cord and hoses.
The nozzle is mounted magnetically so that it may
also be positioned as needed.
A