Baileigh Industrial DP-1200VS, Operator'S Manual

Page: 10 / 40

8
8
22. Turn off power before checking, cleaning, or replacing drill bits, or making adjustments or
servicing the machine.
23. Turn off main power to the machine and wait for the drill bit to stop turning before removing
debris, removing or securing the piece part, or changing the position of the work table.
24. Never expose your hands or limbs to the cutting area while the machine is operating.
25. Make sure it is possible to move freely around the machine and associated equipment. The
floor should be kept clean and dry, and the surrounding area well illuminated, so that work
can be performed safely.
26. Properly lock the drill bit in the chuck before operating the machine.
27. Hold the piece part firmly against the table. DO NOT attempt to drill a piece part that does
not have a flat surface against the table, or that is not secured by a vise. Prevent the piece
part from rotating by clamping it to the table or by securing it against the drill press column.
28. Never leave the machine running while unattended. Turn the power OFF. Do not leave the
machine until the spindle comes to a complete stop. When the machine is NOT in use, the
drill bit should NOT be rotating.
29. Remove adjusting keys and wrenches before turning drill press on. Never start the machine
before clearing the table of all objects (tools, scrap pieces, etc.)
30. DO NOT bypass or defeat any safety interlock systems. Never use the drill press without the
swing-away safety guard. Use the safety guard. The safety guard prevents chips from flying
out and causing cuts or burns.
31. Make sure the actuator of the limit switch is seated in the
detent of the round pad or the machine will not run.
TECHNICAL SUPPORT
Our technical support department can be reached at
920.684.4990, and asking for the support desk for purchased
machines. Tech Support handles questions on machine setup,
schematics, warranty issues, and individual parts needs:
(other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileighindustrial.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.