Baileigh Industrial BS-350SA, Operator'S Manual

Page: 57 / 60

54
54
STRAIGHT vise body.
Blade not perpendicular
due to the excessive play
between the guide pads
and maladjustment of the
blocks
Too fast advance
Worn out blade
Wrong tooth pitch
blocks in relation to the vise and adjust
vertically. Adjust the vise head stop
screws if the cut angles are off.
Check and vertically re-adjust the
blade guide blocks; reset proper side
guide play.
Decrease advance, exerting less
cutting pressure. Adjust the braking
device.
Replace the blade.
Depending on the material hardness
and cross section dimensions of the
material, select a different pitch blade.