background image

IMPORTANT NOTICE

CONSUMER MANUAL

 

MAX DRIVE SYSTEM

   

CONSUMER MANUAL

 

MAX DRIVE SYSTEM

2

3

2

   

IMPORTANT NOTICE

This operating manual contains various points 
and pointers, providing important information 
about your new pedelec and how to use it, 
referring to possible damage to property and the 
environment, and warning against potential falls 
and serious damage, including physical injury. It 
is also essential that you comply with the correct 
torque in order to prevent components from 
coming loose or breaking. Make sure to read all 
the documentation supplied.

 

This symbol signifies a risk that the danger 
described may occur. 

 

Warning texts are always displayed against a 
gray background. 

The warnings break down as follows: 

Information: 

This symbol provides information 

about how to use the product or highlights 

specific parts of the operating manual that are 
particularly important.

Warning:

 This symbol is used to warn users 

against improper use that could result in 

damage to property or the environment.

Danger: 

This symbol indicates possible dangers 

to your health and/or even life that may arise if 

specific actions are not undertaken or 
corresponding regulations adhered to.

Important bolted connection! 

Please adhere 

to the exact recommended torque when 

tightening this connection. The correct 
mounting torque is either displayed on the 
component. A torque wrench must be used to 
achieve the precise torque prescribed. If you do
not own a torque wrench, then you should 
leave this work up to a specialist retailer. Parts 
connected using an incorrect torque may fall off  
or break. This can result in serious accidents.

Operating Instructions.

 Make sure to read all 

the installation manuals delivered with the 

product. If you have doubts concerning any part 
of the manual, do not install the product 
yourself. Please consult the local sales office or a 
pedelec dealer for help.

Summary of Contents for DP C07.UART





















Reviews: