background image

 

 

 

SAFETY INSTRUCTIONS

CONSUMER MANUAL

 

MAX DRIVE SYSTEM

   

CONSUMER MANUAL

 

MAX DRIVE SYSTEM

4

5

SAFETY INSTRUCTIONS

  

General information

Please ensure you read the chapters “Before the 
first ride” and “Before each ride” before using 

the pedelec for the first time.

 

If you lend your pedelec to a third party, 
please give them this operating manual 
along with the pedelec. 

 

Check that all quick releases are safe and 
secure every time you ride, and after your 
pedelec has been left unused, even for a 
short period of time. Regularly check that all 
bolts and components are secure. 

 

Never ride with your hands off the handle-
bars, except when signaling a change of 
direction.

When using this product, be sure to follow the 
instructions given in the user manual.

 

It is recommended that you only use genu-
ine BAFANG parts. 

 

The pedelec may suddenly fall over and 
serious injury may occur if nuts and bolts are 
left loosened, or the product is damaged or 
improperly adjusted.

 

When performing maintenance operations 
(replacing parts, for example), be sure to 
wear goggles to protect your eyes.

 

Please refer to the manuals provided along 
with the product for information uncovered 
by this manual.

 

After reading the user manual carefully, keep 
it in a safe place for later reference.

  

For your safety

Always apply the Pedelec’s brakes before 
placing your foot on the pedal. The motor will 

drive forward as soon as you push down the 
pedal. This force may be unfamiliar and can lead 
to falls, danger or even traffic accidents, which 
could result in injury.

 

Do not pay too much attention to the cycle 
display while riding, otherwise you may fall 
off the pedelec.

 

Check that the wheels are securely attached 
to the pedelec before you start riding. If 
the wheels are not securely installed, the 
pedelec may fall over and serious injury may 
result.

 

When riding a pedal-assisted electric pe-
delec, make sure that you are fully familiar 
with the starting characteristics of the 
pedelec before riding it. If the pedelec starts 
off suddenly, accidents may occur.

 

Make sure the pedelec's lights are on before 
riding at night.

 

It is vital that all bolted connections on the 
pedelec have the correct torque in order 
to ensure that they are secure. An incor-
rect torque can damage the screw, nut or 
component. Always use a torque spanner 
to tighten screw joints. You are not able to 
correctly tighten these bolted connections 
without this specialist tool!

  

Installation and 
Maintenance

 

It is vital that all bolted connections on the 
pedelec have the correct torque in order to 

ensure that they are secure. An incorrect torque 
can damage the screw, nut or component. 
Always use a torque spanner to tighten screw 
joints. You are not able to correctly tighten these 
bolted connections without this specialist tool!

Before performing any kind of work on your 
Pedelec, turn off the electric motor unit and 

remove the battery. Not doing so may result in 
serious injury and/or electric shock.

The frequency of maintenance will vary 
depending on riding conditions. Periodically 

clean the chain using an appropriate chain 
cleaner. Do not use alkaline or acidic cleaning 
agents to remove rust under any circumstances. 
If such cleaning agents are used, they may 
damage the chain and serious injury may result.

  

Safety Precautions

 

Please follow the instructions given in the 
user manuals for your riding safety.

 

Regularly examine the battery and the 
charger for damage, especially the cable, 
plug and casing. If the battery or charger is 
damaged, it must not be used until it has 
been repaired.

 

Please follow the guidance given by 
the safety supervisor or the instructions 
indicated in the manual when using the 
product. This product is not intended for use 
by persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lacking the required experience and knowl-
edge, unless supervised or having received 

instructions concerning use of the product 
by a person responsible for their safety.

 

Do not allow children to play near the 
product.

 

Should you encounter any errors or prob-
lems, consult your nearest dealer.

 

Do not modify the system yourself. Doing 
so may be considered illegal or cause the 
system to malfunction.

 

For information on product installation and 
adjustments, please consult with your dealer.

 

The product is designed to be fully water-
proof so as to withstand wet weather riding 
conditions. However, do not deliberately 
immerse it in water.

 

Do not clean the pedelec using a high-pres-
sure cleaner. If water gets into any of the 
components, operating problems or rusting 
may result.

 

When shipping the product on a high-speed 
vehicle exposed to rain, remove the battery 
and put it in a safe place to stop it from 
getting wet.

 

Handle the product carefully, and avoid 
subjecting it to any strong impacts.

 

Key important information may also be 
found on the product labels.

 

When buying a spare key for the battery, be 
sure to provide the number on the battery 
key. Please keep the number in your mind or 
your notebook.

 

Use a wrung-out damp cloth to clean the 
battery casing.

 

For any questions regarding maintenance 
and use of the product, please contact the 
dealer where you bought the product.

Summary of Contents for DP C07.UART





















Reviews: