Badger Meter ModMAG M Series, User Manual

Page: 47 / 76

Communication
Port A
Settings
(continued)
Data Bits
[8 bits]
S
The following data bits are supported:
• 8 bits
• 7 bits
• 5 bits
To change the data bits, follow these steps from the Port A Settings menu:
1 . Select Data Bits to view the Data Bits display .
2 . Select one of the following:
8 Bits
,
7 Bits
or
5 Bits
.
3 . Press [ E ] to save the option and to return to the Port A Settings menu .
Parity
[Even]
S
The following parities are supported:
• Even
• Odd
• None
To change the parity, follow these steps from the Port A Settings menu:
1 . Select
Parity
to view the Parity display .
2 . Select one of the following: None , Even or Odd .
3 . Press [
E
] to save the option and to return to the Port A Settings menu .
Stop Bits
[1 Stop Bit]
S
The following stop bits are supported:
• 1 Stop Bit
• 2 Stop Bits
To change the stop bits, follow these steps from the Port A Settings menu:
1 . Select
Stop Bits
to view the Stop Bits display .
2 . Select one of the following: 1 Stop Bit or 2 Stop Bits .
3 . Press [
E
] to save the option and to return to the Port A Settings menu .
Port B
Settings
OTE: N The parameters for Port B are the same as for Port A , with the exception of the additional External
Port Address detailed below .
Port Address
[1]
S
An additional communication port, known as Port B , offers enhanced communications
with the meter . This port is located on the 12-pin terminal of the PCB . Enhanced
protocols like HART, Profibus DP or Modbus RTU over RS485 are available . In addition,
this communication port has similar configurable properties as port A . Refer to
the following user manuals for additional information regarding the enhanced
communication capabilities of the M2000 meter . Each manual is available at
Badgermeter.com .
• M2000HART® Bi-Directional Communication Protocol Data Access
(MAG-UM-01408-EN)
• M2000PROFIBUS DP (MAG-UM-01409-EN)
• M2000Modbus RTU Communication Daughterboard (MAG-UM-01410-EN)
External Port
Address
[1]
S
For Profibus use only . Use External Port Address to configure the Profibus DP
daughterboard address .
Using the Main Menu Programming Options
Page 47 March 2022 MAG-UM-01272-EN-21