Entering Your Personal Identification Number (PIN)
If your system has been set up with PIN security, you need to enter a PIN to access programming functions . There are three
access levels, each with its own unique PIN: User, Service and Administration . Your system administrator can provide you with
the appropriate PIN .
OTE:
N
All PINs are factory set to 00000 . If the system administrator has not set the PIN, pressing [
E
] from the
Start Screen
opens the
Main Menu
.
If you forget or misplace your PIN, call Badger Meter Customer Service to get a master password . When you call, have
the security code that appears in the upper right corner of the
PIN Request
display .
Follow these steps to enter your PIN in the M2000 meter:
1 . At the
Main Menu
, press
[
E
] . The
PIN Request
display opens .
PIN REQUEST 12345
Please enter
pin #: 00000
CHG:+,- NEXT:E
Security Code
Figure 36: PIN request
2 . Press [
+
] to increment the numeral .
3 . Press [
E
] to move the cursor to the next digit .
4 . Repeat the steps to enter each of the five digits to match your PIN .
5 . Press
[
E
]
.
If you entered a valid PIN, the
Main Menu
opens indicating your level of access .
If you entered the wrong PIN, the following displays:
MENU ACCESS
DENIED
Figure 37: Wrong PIN entered
• Press
[
E
]
to return to the
PIN Request
display .
• Repeat Steps 1 through 5 .
OTE:
N
Be sure to log off when you have completed work with the meter . Otherwise, there is a five-minute delay between
your last activity and the time when the meter automatically logs you off .
Programming the M2000 Meter
Page 31
March 2022
MAG-UM-01272-EN-21
