background image

                                                                                                                                                              

Rev5/20/10

 

BRS

 

Play Set Assembly Manual FAQs: 

1. Does the area for the playset need to be level?  
 
Yes. Backyard Discovery recommends the playset be positioned on a flat level area for 
maximum safety and durability. The stakes provided should be used to secure it firmly to the 
ground. 
 
2. What size area is recommended for the playset?  
 
Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset 
for maximum safety. 
 
3. What age range is appropriate for the playsets?  
 
Backyard Discovery playsets are recommended for children ages 3 – 10 years. 
 
4. Is the wood treated with chemicals?  
 
Backyard Discovery uses 100% Chinese Cedar wood which is naturally bug resistant, decay 
and rot resistant. To help ensure your child’s safety, our wood is completely chemical free and 
we do not use pressure-treated wood. The stain we use is a top coat using a water-based 
product that is for appearance only. 
 
5. How often should the playset be stained?  
 
Backyard Discovery recommends the playset be stained once each year. A water or oil based 
stain can be used at the customer’s discretion. 
 
6. Why does it seem that my swing set is developing cracks?  
 
Wood is a natural material; no two pieces are exactly alike. Each piece has its own 
characteristics and personality and reacts differently to climate changes. When any wood 
product is exposed to the elements, it develops “wood checks”. A check is the radial separation 
of the wood fibers running with the grain of the wood. These are caused by the varying 
temperature and moisture conditions. A check is not a crack – it does not affect the strength or 
durability of the wood or structural integrity of the play set. 
 
7. Do Backyard Discovery playsets come with a warranty?  
 
Yes. All Backyard Discovery products carry a 1-year replacement warranty on all parts for 
manufacturer’s defect. Our wood carries a 5 year warranty on rot and decay as well. Please see 
warranty details for more information. 
 
8. What is the best way to get started assembling the playset?  
 
Backyard Discovery recommends taking all the parts out of the boxes and arranging them by 
part number before you begin any assembly. This will not only allow faster assembly, but will 
also identify any parts that may be missing or damaged so they can be replaced before 
assembly. If parts are missing or need replacement, go to 

Summary of Contents for Oxford 6111
























































































Reviews: