![background image](http://html1.mh-extra.com/html/backyard-discovery/oxford-6111/oxford-6111_owners-manual_3386775079.webp)
Swing Beam Attachment
Phase 30
Phase Notes
• Assemble with hardware as shown.
Parts needed:
• (1) SWING BEAM ASSEMBLY
• (1) HC - BACKYARD DISCOVERY ID TAG - A100164
Hardware needed:
• (4) BX - WASHER SPLIT 5/16 - H100095
• (4) CD - WASHER FLAT 8x27 - H100105
• (4) AJ - BOLT HEX 5/16x1-1/4 - H100042
• (4) CY - SCREW PWH 8x3/4 - H100128
Step 2: Attach the Swing Beam Assembly to 'G2'
Swing Beam Rail using Bolts 'AJ', Washer 'BX' &
Washer 'CD' through the angle brackets & 'G2'
swing beam rail and into T-Nut 'BG', as shown.
Step 1: Attach Backyard Discovery ID
Tag 'HC' on wall rail 'G6' using Screws
'CY', as shown.
G6
CY
HC
AJ
BX
CD
BG
BX
CD
BG
G2
Note: It is vital that the fort
be level before and after
each phase of assembly.
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.