Parts needed:
• (1) LP - STEERING WHEEL - A100105
• (1) LN - TELESCOPE - A100104
Phase Notes
• Assemble with hardware as shown.
Hardware needed:
• (1) Y - LAG SCREW WH 5/16x2 - H100026
• (1) CD - WASHER FLAT 8x27 - H100105
• (1) NX - SCREW TAPPING 14x2-1/2 - H100082
Steering Wheel & Telescope Attachment
Phase 35
G2
Y
CD
LP
NX
E5
E5
LN
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
Step 1: Pre-drill & attach 'LP'
Steering Wheel to 'G2' swing
beam rail using Lag Screw 'Y' &
Washer 'CD', as shown.
Step 2: Pre-drill & attach 'LN'
Telescope Base to the center of
'E5' deck upright using Screw
'NX'. Next, slide 'LN' Telescope
onto telescope base until the
tabs lock into place, as shown.
