![background image](http://html1.mh-extra.com/html/baby-trend/fb58944/fb58944_owners-manual_3243197015.webp)
To secure car seat in vehicle:
1. Assemble of the Back Support (see “Assembly
and Removal of Back Support” section).
2. Adjust the harness strap height for your
child – Harness straps MUST be at or
above the child’s shoulders (see
“Changing Harness Strap Height” section).
3. Route the LATCH lower anchor belt using
the “FRONT ENTRY” belt routing as
shown in Section 7.3.1.
- Route LATCH Lower Anchor Belt
over top of the Harness Straps so
that Harness Straps are routed
between back of Back Support
and LATCH Belt.
7.3.2
REAR ENTRY Belt Routing
• From the rear of the car seat,
insert the LATCH connector or
the vehicle seat belt latch plate
into the Belt Path Opening in the
Back Support .
• Pull the LATCH or vehicle seat belt
through the Belt Path Opening to the
front of the car seat. Slide the belt under
the seat pad and across the front of the
Back Support to the Belt Path Opening
on the opposite side .
• From the front of the Back
Support, insert the LATCH
connector or the vehicle seat belt
latch plate into the Belt Path Opening
in the Back Support and pull the
LATCH or vehicle seat belt through .
Note: Store tether on back of seat when not in use
as shown on page 41.
7.4
Installation
WITH
LATCH
7.4.1
Installation - LATCH
FRONT ENTRY
Belt Routing
• Use this installation method when using WITH the
Top Tether and children 40 to 50 lbs. (18 to 23 kg).
• The LATCH attachment system, when used WITH the
Top Tether, may be used to 50 lbs. (23 kg).
27
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
Back
Support
Belt Path
Openings
1
1
2
3
2
3
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
28
WARNING!
• Only use the car seat LATCH System in vehicle seating
positions designated by the vehicle manufacturer as LATCH
use positions and have anchor spacing of 11 inches (280 mm).
• Harness straps MUST be routed between back of Back
Support and the LATCH belt when installed using “FRONT
ENTRY” belt routing.
• The car seat must be held tightly by the LATCH System.
• Never attach more than one lower anchor connector or top
tether hook to a vehicle anchorage unless recommended in
the vehicle owner’s manual.
• Top tether MUST be used for this installation.
Top
Tether
FRONT
ENTRY
Belt
Routing
Route LATCH or vehicle seat
belt over top of Harness Straps