background image

INSTRUCTION 

MANUAL

 

  

kin AP

convertible booster seat

motherschoice.com.au

AS/NZS 1754:2013

Lic 40071

SAI Global

service

forward 

facing

c

u

st

om

er se

rv

ic

e

au

str

alia wid

e

*

#

rearward

 facing

0-

30 

month

s

Australian Customers

1300 809 526

New Zealand Customers

0800 628 000 (toll free)
dorel.com.au

A Dorel Australia Brand

 

Product specifications

Product weight: 

5.8kg

 

Product dimensions: 45 (W) x 40 (D) x 77– 85 (H) CM
Carton weight: 

7.8kg

 

Carton dimensions:  46 (W) x 44 (D) x 79 (H) CM
Pack size: 1

 

motherschoice.com.au

prime AP

convertible car seat

Air Protect

 technology

for superior side 

impact protection

Also available

Child Restraint

Extension Straps 
300mm 

Item# 014398
600mm 

Item# 014399

A convertible booster that grows with your child. Offering the added

protection of Air Protect™ and wicking fabric

Features

• Air Protect™ superior side impact protection

• Wicking fabric to keep your child cool and dry

• Easy one handed 5 poistion headrest adjustment
• Installation recline for better fitment into most cars

• Removable and machine washable insert and 

    harness pads

• Plush infant insert
• 2 swing out cup holders
• Arm rests for child’s comfort
• 2 year fabric warranty on the cover and a 6 year hardware          

    warranty for your peace of mind

• Narrow, yet comfortable seat allows for up to 3 seats 

    across the back

Suitability

Toddler Mode

• To be used in forward-facing position with built-in harness 

  from approx. 6 months to approx. 4 years of age or until the 

  child’s shoulders reach the middle shoulder height marker.

Booster Mode

• To be used with a lap-sash seatbelt from approx. 4 years 

  of age to approx. 8 years of age or until child’s shoulders 

  reach the upper shoulder height marker.

Blackened Sky

Item# 019030

Meteor Blue

Item# 019129

Moonlit Grey

Item# 019029

 

*

unharnessed

mode

ye

ars

 to 8 ye

ar

s

   

   

AS/NZS 1754:2013

Lic 40071

SAI Global

harnessed

mode

    

6

 m

on

ths to 4 y

ea

rs

#

The zeal AP booster seat has been designed to 

grow with your child

Features

• Air Protect™ superior side impact protection

• Wicking fabric to keep your child cool and dry

• Easy one handed 5 poistion headrest adjustment
• Installation recline for better fitment into most cars

• Removable and machine washable fabric cover 

• Plush infant insert
• 2 swing out cup holders
• 2 year fabric warranty on the cover and a 6 year hardware        

  warranty for your peace of mind

• Narrow, yet comfortable seat allows for up to 3 seats 

    across the back

Suitability

Booster Mode

To be used with a lap-sash seat belt from approx. 

4 years of age to approx. 8 years of age or until 

child’s shoulders reach the upper shoulder height marker.

• Air Protect™ superior side impact protection
• 5 position headrest adjustment
• Removable infant insert and harness pads

• Machine washable covers

Illustrations and designs may vary.

Summary of Contents for kin AP









































Reviews: