![background image](http://html1.mh-extra.com/html/baby-trend/fb58944/fb58944_owners-manual_3243197022.webp)
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
42
7.5.2
Installation - Lap/Shoulder Belt
REAR ENTRY
Belt Routing
• Use this installation method when installing
WITHOUT a Top Tether and use with children
40 to 50 lbs. (18 to 23 kg).
To secure car seat in vehicle:
1. Assemble the Back Support (see
“Assembly and Removal of Back
Support” section).
2. Store LATCH and Top Tether by
securing LATCH Connectors and
Tether Hook on LATCH/Tether
Storage at bottom of Back
Support as shown.
3. Adjust the harness strap height for your
child – Harness straps MUST be at or
above the child’s shoulders (see
“Changing Harness Strap Height” section).
4. Place the car seat on the vehicle seat in
a seating location and centered between
the Lap/Shoulder belt anchorages (see
“Selecting a Vehicle Seating Location”
section).
5. If the vehicle seat back is adjustable, adjust
into the upright position or the position
specified in the vehicle owner’s manual
for use with a car seat.
6. Pull the vehicle Lap/Shoulder belt out
and route through the car seat using the
“REAR ENTRY” belt routing as shown
in Section 7.3.2 and buckle the vehicle
seat belt.
7. Pull to check that the vehicle buckle is
securely locked.
8. For vehicles with switchable retractors,
pull the shoulder belt all the way out to
switch the retractor into the locking
retractor mode and release the shoulder
belt allowing it to retract.
LATCH Connectors
Top Tether
Tether/LATCH
Storage
REAR
ENTRY
Belt
Routing
WARNING!
• Vehicle seat belt system MUST stay tightly adjusted to car
seat at all times. If vehicle seat belt does not stay tight, read
vehicle owner’s manual and “Vehicle Seat Belts’ section in
this manual.
• Top Tether MUST not be used for this installation.
41