Baby Trend FB58944 Owner'S Manual Download Page 20

Page: 20 / 48

3. Adjust the harness strap height for

your child – Harness straps MUST be at or

above the child’s shoulders (see “Changing

Harness Strap Height” section).
4. If Top Tether is not being used, store Top Tether

by securing Tether Hook on Tether Storage at

bottom of Back Support as shown.

5. If Top Tether is being used, place Top Tether

over the top of the Head Support and

rest inside seating area.
6. Place the car seat on the vehicle seat in a

seating location equipped with Lap/Shoulder

belt and centered between the Lap/Shoulder

belt anchorages (see “Selecting a Vehicle

Seating Location” section).
7. If the vehicle seat back is adjustable,

adjust into the upright position or the

position specified in the vehicle owner’s

manual for use with a car seat.
8. Pull the vehicle Lap/Shoulder belt out

and route through the car seat using

the “FRONT ENTRY” belt routing as

shown in Section 7.3.1 and buckle

the vehicle seat belt.

- Lap belt section of the vehicle

Lap/Shoulder Belt must be

routed under armrest and

shoulder belt section must be

over the top of the armrest.

- Route Vehicle Lap/Shoulder Belt over

top of the Harness Straps so that

Harness Straps are routed between

back of Back Support and vehicle belt.

9. Pull to check that the vehicle buckle is

securely locked.

10. Position the vehicle shoulder belt on the

side of the car seat nearest the vehicle

buckle over the top of the armrest and

route it through the Toddler Shoulder

Belt Guide.

Move the shoulder belt on the side

opposite the vehicle buckle up between

the head support and top of back

support as shown.

11. For vehicles with switchable retractors,

pull the shoulder belt all the way out to

switch the retractor into the locking retractor

mode and release the shoulder belt allowing

it to retract.

12. Place knee inside seat and while pressing

down , pull on the vehicle shoulder belt just

above vehicle buckle to tighten the vehicle

lap belt around the car seat.

7.0

Toddler Car Seat (

With

Built-in

Harness) Installation and Use

7.0

Toddler Car Seat (

With

Built-in

Harness) Installation and Use

LATCH Connectors

Top Tether

Tether/LATCH

Storage

Top

Tether

FRONT ENTRY

Belt Routing

Top

Tether

Toddler

Shoulder

Belt

Guide

Shoulder

belt on side

opposite

vehicle buckle

Harness Straps must be

between back of Back Support

and Lap/Shoulder Belt.

Shoulder

Belt

Lap Belt

Summary of Contents for FB58944

















































Search results

Summary of Contents for FB58944

Reviews:

Related manuals for FB58944

Brands by name

Popular brands

Baby Trend FB58944, Owner'S Manual

Search results

Summary of Contents for FB58944

Reviews:

Related manuals for FB58944

Brands by name

Popular brands