![background image](http://html1.mh-extra.com/html/baby-trend/fb58944/fb58944_owners-manual_3243197016.webp)
4. Place Top Tether Strap over the top of
the Head Support and rest inside seating
area.
5. Place the Car Seat on the vehicle seat in
a seating location equipped with LATCH
and centered between the LATCH
anchorages (see “Selecting a
Vehicle Seating Location” section).
6. If the vehicle seat back is adjustable, adjust
into the upright position or the position
specified in the vehicle owner’s
manual for use with a car seat.
7. Attach the LATCH connectors on the
Lower Anchor Belt to the vehicle LATCH
anchorages and . Listen for the
“click” when the connectors lock onto
the vehicle anchorage.
8. Pull to check that the connectors
are securely attached .
9. Place knee inside seat and while
pressing down, pull on the free end of the
LATCH lower anchor belt to tighten the
LATCH lower anchor belt around the
car seat.
29
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
30
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
1
2
3
1
3
LATCH
Connector
2
Top
Tether
10. Attach Top Tether Hook to vehicle tether
anchor and . Listen for the “click”
when the tether hook locks onto the
vehicle tether anchor.
11. Pull on the Top Tether Strap to check that
the Tether Hook is securely attached .
12. Pull on free end of Top Tether Strap until
all slack is removed from the Top Tether .
13. Check for a secure installation by
grasping the car seat armrest and
pushing side-to-side and front-to-back.
The car seat should not move more
than 1 inch in either direction.
• If the car seat moves more than
1 inch, retighten the LATCH belt
and Top Tether and test again.
• If the car seat moves less than 1 inch,
installation is complete. However if the
car seat still moves more than 1 inch,
try another seating position or see the
“Vehicle Seat Belts” section and check
your vehicle owner’s manual for
information on securing car seats.
1
1
2
1
2
1
2
3
4
3
4
Top
Tether
2