![background image](http://html1.mh-extra.com/html/baby-trend/fb58944/fb58944_owners-manual_3243197017.webp)
31
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
32
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
7.4.2
Installation - LATCH
REAR ENTRY
Belt Routing
• Use this installation method when using WITH a
Top Tether for children 22 to 40 lbs. (10 to 18 kg).
• Use this installation method when using WITHOUT
a Top Tether for children 22 to 50 lbs. (10 to 23kg).
• When used
WITHOUT
the Top Tether the LATCH attachment
system may be used to 50 lbs. (23 kg) or maximum weight for
LATCH use specified by the vehicle’s owner’s manual.
To secure car seat in vehicle:
1. Assemble the Back Support (see “Assembly
and Removal of Back Support” section).
WARNING!
• Only use the car seat LATCH System in vehicle seating
positions designated by the vehicle manufacturer for use
with LATCH and have anchor spacing of 11 inches (280 mm).
• The car seat must be held tightly by the LATCH System.
• When using LATCH WITH a Tether, belt rounting must be
changed to Front Entry with Top Tether when child’s WEIGHT
is 40 lbs. (18 kg) or more.
• Never attach more than one lower anchor connector or top
tether hook to a vehicle anchorage unless recommended in
the vehicle owner’s manual.
To remove car seat:
1. Loosen Top Tether by pressing the button
on Tether Adjuster and sliding belt through
adjuster .
2. Unhook Top Tether Hook from vehicle tether
anchor. Press up on retainer , unhook
Tether Hook , and remove .
3. Loosen LATCH lower anchor belt by
putting knee in seat and while pressing
down , press the button on LATCH
Adjuster and slide belt through
adjuster.
4. Unhook LATCH lower anchor belt connectors
from vehicle anchors. Press up on retainer ,
unhook Tether Hook , and remove .
NOTE: When removing the LATCH
connector, rotating the connector
90º can asist in removal from
vehicle anchor.
1
2
3
4
1
2
1
2
2
3
1
2
3
1
2
3
4
1
Tether
Adjuster