![background image](http://html1.mh-extra.com/html/baby-trend/fb58944/fb58944_owners-manual_3243197021.webp)
13. While holding the lap belt tight, pull slack out
of shoulder belt and allow retractor to tighten
shoulder belt.
14. If installing with Top Tether, attach Top Tether
Hook to vehicle tether anchor and .
Listen for the “click” when the tether hook
locks onto the vehicle tether anchor. If Top
Tether is not being used, go to Step 17.
15. Pull on the Top Tether Strap to check that
the Tether Hook is securely attached .
16. Pull on free end of Top Tether Strap until
all slack is removed from the Top Tether .
17. Check for a secure installation by grasping
the car seat armrest and pushing side-to-side
and front-to-back. The car seat should not
move more than 1 inch in either direction.
• If the car seat moves more than 1 inch,
retighten the vehicle seat belt and Top
Tether and test again.
• If the car seat moves less than
1 inch, installation is complete.
However if the car seat still moves
more than 1 inch, try another
seating position or see the “Vehicle
Seat Belts” section and check
your vehicle owner’s manual for
information on securing car seats.
Use of a Belt Locking Clip may be
required.
39
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
40
1
2
1
2
3
4
3
4
To remove car seat:
1. Loosen Top Tether by pressing the button on
the Tether Adjuster and sliding belt through
adjuster .
2. Unhook Top Tether Hook from vehicle
tether anchor. Press up on retainer ,
unhook Tether Hook , and remove .
3. Unbuckle vehicle seat belt and remove
seat belt from belt path.
1
2
3
4
2
3
4
1
Tether
Adjuster