![background image](http://html1.mh-extra.com/html/baby-lock/regalia-blrg20/regalia-blrg20_service-manual_3417908031.webp)
BabyLock.com
Page 31
F
H
G
D
C
E
Section 11: Needle Position X / Left to Right, Check &
Adjustment
Adjustment for X axis: Cover On
NOTE: adjustment is done with the front
frame cover on. The picture shows the cover
off for illustration purposes only!
The primary adjustment is accomplished using the
right side of the head frame. The screws on the
left side are loosened to allow movement of th
head frame .
If a correction is necessary:
• Loosen screws F, G and H through access holes two
or three turns .
• Loosen screws D and E two or three turns and back
off screw C a little.
• Push the head frame back against the main frame
so that screw C touches the main frame. Adjust
screw C to bring the needle to center in the
needle plate .
• Gently tighten screw E until it lightly touches the
main frame
• Tighten screw D.
NOTE: If the needle changes, repeat the
process .
• Repeat the process on the left side of the
head frame .
NOTE: If the needle changes, repeat
the process .
X-axis Access
Holes
Needle Position X / Right to Left
Machine Left / Machine Right
Tools required: (2.5 mm and 4 mm handle Allen).