![background image](http://html1.mh-extra.com/html/baby-lock/regalia-blrg20/regalia-blrg20_service-manual_3417908053.webp)
BabyLock.com
Page 53
Connection for the front handle bar membrane switch
controls is as follows:
• J7 Control Board QM20032 left connector
receptacle .
• Widest large white connector (circled left) with
multiple white and yellow wires to Control Board
J7 left receptacle.
• The wires from the large connector at the Control
Board J7 split off to supply the front nose cover
board QM20034 at J1, the front light ring, and
the front handlebar connection board QM20035
mounted on the inside of the back machine frame
casting. (Circled left)
• Two mini USB connectors for front handlebar con-
nection on the main machine frame casting at front
left, for front handlebar membrane switch controls.
NOTE: The bottom connection on the side
of the machine is for the left side handlebar
membrane switch and the top connection is
for the right side handlebar membrane switch.
.
Section 17: Electronic Information - Handlebar Front
Membrane Switch Connection
Right Side Switches
Left Side Switches