![background image](http://html1.mh-extra.com/html/baby-lock/regalia-blrg20/regalia-blrg20_service-manual_3417908029.webp)
BabyLock.com
Page 29
Check: Assure the four wires from the front of the
machine going to the nose cover board pass through
the hole in the castings without being pinched.
Check: Assure the three wires from the front handle
bar connection board, the needle laser, and light ring
do not cover the head frame needle position adjust-
ment screws and will not be pinched when the front
cover is installed .
Check: Assure the wire in the bottom of the free arm,
that goes from the back of the machine to the front of
the machine, for the bobbin area light, is run properly
and will not be pinched when the front cover
is installed .
Section 10: Replacing Front Cover (Continued)