B9Creations B9 Scan 500, Operating Manual

Page: 38 / 54

B9 Scan 500 Operating Manual Page38
11. MAINTENANCE
Proper functional and operational reliability of the unit are only ensured if the required tests,
maintenance and service work are performed by E.G.S. srl service agents or personnel in-
structed by E.G.S. srl.
E.G.S. srl will not accept any liability for damage – in particular personal injury – resulting
from improper maintenance or repair work which has not been performed by E.G.S. srl ser-
vice agents or adequately trained personnel or if no original spare parts or accessory parts
have been used during the exchange of parts.
We recommend to conclude a maintenance contract with our service agents; an offer can
be requested there: see paragraph "Service".
11.1. ROUTINE MAINTENANCE
The B9 Scan 500 periodic maintenance operations are:
Maintenance Action D W M 3M 6M 12M
Maintenance and Care
Cleaning Cover & Plate
Cleaning Cameras & Projec-
tors Lenses
Checking Power Cable
Dust filter cleaning Cleaning Filter
"D" Daily, "W" Weekly, "M" Monthly
NOTE
•
The dust can be a major problem for the scanner. Its accumulation in vents, heat-sinks and
fans can block cooling air making the equipment less reliable. If the scanner is installed in
a very dusty environment try to protect it as much as possible. When not used protect it
using a cloth to isolate it from environment.
11.1.1. MAINTENANCE AND CARE
Cleaning Cover
& Plate Mechanical parts do not require any maintenance
.
External covers and working plate can be cleaned with a soft cloth
dampened either with clean water or with water containing a mild de-
tergent.