B-TEK Scales T403S, User Instructions

Page: 29 / 74

BTEK T403S Indicator User Instructions 29
3.7 Remote display application
5. Repeat the steps to perform another peak weighment.
Below is an example of the minimum weight display. Note the pair of circle annunciators
that are lit.
Below is an example of the maximum weight display. Note that a different pair of circle
annunciators are now lit.
3.7 Remote display application
This section applies if you have the Remote Display application active.
The indicator can be configured to work as a remote display with other compatible
indicators.
To use a T403S indicator to operate as a Remote display for a Primary indicator you
must configure settings in the Supervisor menu and in a separate password protected
menu.
A remote indicator will display the same information as the primary indicator and
pressing the main function keys (Tare, Select, Zero, Print, and Units) on the remote will
function as if they were pressed on the primary indicator.
Contact your local representative for information on setting up the T403S indicator as
a Remote or Primary indicator.
lb
lb
Numeric entries are non-functional from a remote display unit, or secondary indicator,
such as numeric tare entry, numeric ID entry, etc.