B-TEK Scales T403S, User Instructions

Page: 16 / 74

16 BTEK T403S Indicator User Instructions
Indicator applications
OR
4b. Press UNITS to select the next output …
out2 is displayed.
5. Repeat steps 3 - 4b for each output.
6. Press F1 twice to return to normal weighing mode with the setpoints active.
3.1.5 Printing
To print the current weight information, press PRINT . The configured print format will be
output through the configured port to the connected peripheral device. The indicator
can be configured to only allow one print for each weighing sequence. If
PRINT is
pressed when so configured, the message cAnt will appear.
Refer to Default print formats on page 42 .
Printing any of the configured print formats is possible using the Numbered Print
feature. Enter the print format number and then press the
PRINT key. The selected
print format will be transmitted out all ports that are configured to print.
3.1.6 ID Entry
An ID can be entered for use with transmitted or printed transactions. Press and hold
the
ID key and the message id is displayed followed by the current ID value. Enter up
to seven digits (numeric only) and press ZERO . To review press the ID key and the
active ID will be displayed for a few seconds before returning to normal operation.