B-TEK Scales T403S, User Instructions

Page: 10 / 74

10 BTEK T403S Indicator User Instructions
Introduction
2.1.1 Annunciators
The annunciators on the display are shown and labeled in Figure 2.2 .
Figure 2.2 Annunciators
These annunciators will light during operation to inform the user of the weighing mode,
active unit of measure, etc.
Press the
SETUP
key to access the setpoint editor.
Press and hold to view the password entry screen for menu access.
Press the TARGET key setup checkweighing functions.
Use the numeric keypad to enter numbers in the appropriate screens.
Press the
C (CLEAR) key to clear the last entry.
SETUP
TARGET
1 2 3
4 5 6
7 8 9
C 0
GROSS
NET
TARE
COUNT
PRINT SP1 SP2 SP3 QTY
PT
oz
g
kg
lb
bargraph
center-of-zero
motion
Gross weight
Net weight
Tare weight
Print
Count
battery
setpoints
See Table 2.1
quantity
preset tare
units of
measure
Table 2.1 Circle Annunciator assignments
Annunciator Indicates
Circle 1 (left most) Network activity
Circle 2 Custom unit
Circle 3 Pieceweight
Circle 3 & 4 Minimum
Circle 4 & 5 Maximum