B-TEK Scales T403S, User Instructions

Page: 21 / 74

BTEK T403S Indicator User Instructions 21
3.3 Counting application
b If the sample size was not large enough or if the weight was unstable,
Abort is displayed and the display returns to gross weighing mode.
Repeat steps 3 through 5 using a larger sample size.
6. Place the parts on the scale to be counted. To accumulate the count and
number of transactions, press
PRINT while in count mode.
7. If enabled, press and hold PRINT for three seconds to print and/or clear the
active count total. These functions are enabled or disabled in a password
protected menu.
3.3.6 Piece weight entry
Piece weight can be entered manually.
1. Press and hold SAMPLE .
The current piece weight is displayed.
2. Key in a new value and press ZERO to accept.
Minimum sample weight is the gross zero band value. The initial sample count is 5
pieces. The maximum number of pieces that can be sampled is 100,000.