Axon AXION AX-100 User Manual Download | Manualshive

Page: 84 / 96

background image

BLUE CHIP

AXON AX-100 GUITAR TO MIDI CONVERTER

84

User manual AXON AX-100 / AX-100 SB

165 HS Morph Vol: Preset with layered sound. Here layering is
controlled by pick position. The pick controller is identical for both
presets (CC:VOLUME) only reversing the values for PICKVAL1 and
PICKVAL2.

166 HS:MorphAtck: Preset with layered sound. Similar to the previous
preset:HS:MorphVol except that Controller #73 (ATTACK) is used
instead ov volume. Depending on the pick position, one sound will
be heard first with the other layered later.

167. SS:Bass+Guit : Preset with string split. The two lowest strings
are assigned to a bass sound, the 4 upper strings, a guitar sound. Like
the above presets, a hold preset is implemented here to give you a
layered pad sound when you press the hold pedal.

168. SS:Bass+Slap : Preset with string split. The bottom four strings
are assigned to a fretless bass sound, the upper two a slap bass soud.
Both are transposed down one octave.

169. SS:Drum+Bass : Preset with string split. The bottom two strings
are assigned to a drum kit; the upper four to a bass sound.

170. SS:Sitr+Flut : Preset with string split. The bottom two strings
are assigned to a sitar; the upper four to a flute sound.

171. SS:Tuba+Brss : Preset with string split. The bottom two strings
are assigned to a tuba; the upper four to a brass sound.

172. FS:Guit+Dist : Preset with fret split. Up to the 7th fret a jazz
guitar is played. Above that, a distorted guitar.

173. FS:Bass+Bass : Preset with fret split. Up to the 9th fret a pick
bass is played. Above that, a fretless bass. These are transposed down
an octave.

174. FS:Guit+Ocar : Preset with fret split. Up to the 9th fret a distorted
guitar is played. Above that, an ocarina. The ocarina is transposed
one octave up.

«
...
82
83
84
85
86
...
»

Summary of Contents for AXION AX-100

































































































Reviews:

No comments

Related manuals for AXION AX-100

Brand: Danfoss Pages: 7

Brand: Danfoss Pages: 16

VLT 2800 Series

Brand: Danfoss Pages: 34

VLT AutomationDrive FC 300

Brand: Danfoss Pages: 60

VLT 5000 Series

Brand: Danfoss Pages: 63

Brand: Kohler Pages: 44

Brand: Kramer Pages: 15

Brand: PEAK COMMUNICATIONS Pages: 18

samlexsolar SPB-EXPLORE200

Brand: Samlexpower Pages: 2

LaCinema Mini HD Connect

Brand: LaCie Pages: 74

Brand: Wagan Pages: 44

Brand: TC Communications Pages: 31

Brand: Sunforce Pages: 1

Brand: Kramer Pages: 2

Brand: Cablematic Pages: 3

Brand: e+p Pages: 2

Q.HOME+ ESS HYB-G2

Brand: Q CELLS Pages: 60

Brand: Latte Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands