BLUE CHIP
AXON AX-100 GUITAR TO MIDI CONVERTER
38
User manual AXON AX-100 / AX-100 SB
LENGTH
(1…32)
This parameter allows you to set the maximum number of notes for
the arpeggiator sequence. The buffer memory of the arpeggiator is
expanded to include one more note every time you play a new one
with the hold pedal depressed, until this maximum number is reached.
If you play more notes than this maximum number, the oldest note in
the series will be replaced for every note played beyond the limit you
set here. An arpeggiator sequence can be as long as 32 notes long.
SCAN
(ASSIGN, REVERS, RECYCLE, UP, DOWN, UP/DOWN,
RANDOM)
There are a number of options that determine how an arpeggiator
sequence will be played back:
ASSIGN allows for playback of notes in the same order in which
they were recorded.REVERS acts like a stack of notes where the last
one recorded is the first one replayed. The arpeggiator plays the notes
in reverse order than they were entered. RECYCLE plays the
arpeggiator sequence in normal order as with ASSIGN, but when the
end of the sequence is reached, it is played back in reverse order as
with REVERS until the first note in the sequence is reached, at which
point the process begins from the beginning again. In UP mode, the
notes will be sorted from lowest to highest in pitch and played in that
order.In DOWN mode, the notes are sorted from highest to lowest in
pitch and played in that order.In UP/DOWN mode, the pitches are
played from lowest to highest and then back down to lowest, somewhat
simulating finger picking. RAND plays back the notes of the
arpeggiator sequence in total random order.
PATTERN
(1/16thSt…USER#1…16)
This parameter allows you to set the quantize function of the
arpeggiator sequence. The following quantize functions are available:
1/16thSt:
Classic Arpeggio. Plays back the arpeggiator sequence in staccato
16th notes.
1/16thLg:
16th notes same as above except legato.
1/8thSt:
Plays back the arpeggiator sequence in staccato 8th notes.
