Axon AXION AX-100 User Manual Download | Manualshive

Page: 23 / 96

background image

BLUE CHIP

23

User manual AXON AX-100 / AX-100 SB

AXON AX-100 GUITAR TO MIDI CONVERTER

PAN ENABLE

Panorama Controller (ON/OFF)
Within a given preset of your AXON, it is possible to set distinct
stereo panorama placement for each individual split. Panorama is
MIDI Controller #10 which is sent to your MIDI instruments. If you
don’t want to send Controller #10 events, perhaps because you would
rather use the panorama settings within a connected keyboard, for
example, or because a given MIDI instrument is older and doesn’t
support Controller 10 information, set this value to OFF. If this
parameter is set to ON, the values will be sent that were set in the
Play Area parameters (see PRESET MODE). As will all other
controller information, you AXON will only send Controller 10 if
the panorama settings have changed from what was previously sent,
so as not send redundant information.

REV ENABLE

Reverb Controller (ON/OFF)
For the same reasons (see PAN ENABLE), you may not want MIDI
Controller #91 information (Reverb) for a preset split sent to your
MIDI instruments. Set this value to OFF. If your AXON is equipped
with the internal soundboard, a third parameter, NO EFFECT, is also
listed as a choice. If this is selected, the programmed reverb function
of the preset will be ignored by the soundboard.

CHOR ENABLE

Chorus Controller (ON/OFF)
Here you determine whether MIDI Controller #93 (Chorus) will be
sent to your MIDI instruments or not. (see PAN ENABLE) f your
AXON is equipped with the internal soundboard, a third parameter,
NO EFFECT, is also listed as a choice. If this is selected, the
programmed chorus function of the preset will be ignored by the
soundboard.

VAR ENABLE

Variation Controller (ON/OFF)
ere you determine whether MIDI Controller #94 (Variation) will be
sent to your MIDI instruments or not. (see PAN ENABLE) f your
AXON is equipped with the internal soundboard, a third parameter,
NO EFFECT, is also listed as a choice. If this is selected, the
programmed variation function of the preset will be ignored by the
soundboard.

GLOBALS
PAN ENABLE: ON

GLOBALS
REV ENABLE: ON

GLOBALS
CHOR ENABLE: ON

GLOBALS
VAR ENABLE: ON

«
...
21
22
23
24
25
...
»

Summary of Contents for AXION AX-100

































































































Reviews:

No comments

Related manuals for AXION AX-100

Brand: Orban Pages: 90

Automotive Ethernet Converter

Brand: X2E Pages: 22

Brand: Vacon Pages: 44

Brand: GALAGAR Pages: 28

Brand: ICP DAS USA Pages: 8

Brand: Vanner Pages: 28

ELinx EIR-G-SFP-T

Brand: B&B Electronics Pages: 2

ECO Inverter+ 7

Brand: Oilon Pages: 58

SINEMASTER IG4300

Brand: Kipor Pages: 50

Brand: Yuan Pages: 15

Brand: PRO SIGNAL Pages: 6

Brand: Sovereign Pages: 4

Brand: Xantrex Pages: 86

Pro Power SB Series

Brand: Sterling Power Pages: 8

Brand: StarTech.com Pages: 2

Brand: K1EL Pages: 5

Brand: Arec Pages: 46

Brand: Aus Electronics Direct Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands