Axon AXION AX-100 User Manual Download | Manualshive

Page: 13 / 96

background image

BLUE CHIP

13

User manual AXON AX-100 / AX-100 SB

AXON AX-100 GUITAR TO MIDI CONVERTER

4. Press the + Parameter button, to get to the next Global parameter.
Check to make sure that the parameter ”HOLD CHANNEL” is set to
”7.” If your AXON does not have the optional internal sound board
built in, you should skip to step 5. Otherwise press the + Parameter
button again and set the value for ”SEQ CHANNEL” to ”16” (+/-
Value buttons) if the value is different than 16.

5. Press the + Parameter button to set the values for ”PBEND RAN-
GE.” This value sets the maximum number of halfsteps that are
allowed when Pitchbend information is analysed. What you set this
value for will be determined by the MIDI instrument you will be
using. If in doubt, read the user’s manual of your MIDI instrument. If
your instrument allows, use the +/- Value buttons to set this value to
12 (one octave).

6. Press the + Parameter button to get to ”SND PBENDRG.” If your
MIDI instrument supports setting separate pitchbend parameters for
each sound preset, set this value to ”ON” (+/- Value buttons). If in
doubt, read the user’s manual of your MIDI instrument. If you are
using the internal sound card of the AXON AX 100-SB, set this value
to ”OFF.”

7. Press the + Parameter button repeatedly until you see ”GUITAR
NO” in the display. Now press the ENTER button to get to the
submenu. At the prompt ”TYP:” use the +/- Value buttons to set the
instrument you will be playing into your AXON: ”BASS”,
”GUITAR”, „VIOLINE“ OR „CELLO“ (+/- Value buttons).

8. Press the + Parameter button to tell the AXON about the type of
pickup you are using on your instrument. If you are using an accoustic
guitar or bass with a piezo pickup, choose ”PIEZO” (+/- Value
buttons). Otherwise leave the default setting at ”AIX101.”

You have now completed the basic settings and your AXON is ready
to be played. The changes you made have been automatically saved
in static RAM so that they will still be available after you restart your
AXON. Press the ”EXIT” button twice to get back to normal play
mode.

«
...
11
12
13
14
15
...
»

Summary of Contents for AXION AX-100

































































































Reviews:

No comments

Related manuals for AXION AX-100

Brand: La Marche Pages: 21

Brand: ESI Pages: 17

Brand: Power Fist Pages: 2

Brand: Nexen Pages: 13

Brand: Pro-Ject Audio Systems Pages: 20

Brand: LEXIBOOK Pages: 66

Brand: StarTech.com Pages: 4

Brand: Wagan Pages: 36

Brand: Midmuro Pages: 23

Brand: Sencore Pages: 203

Brand: BZBGEAR Pages: 12

CPSPI3700EVF380

Brand: CyberPower Pages: 94

Brand: Extron electronics Pages: 54

Meizu MINI PLAYER

Brand: DANE-ELEC Pages: 40

Brand: M-Audio Pages: 26

Brand: Polytron Pages: 12

Brand: Clarke Pages: 12

Brand: IAdea Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands