BLUE CHIP
AXON AX-100 GUITAR TO MIDI CONVERTER
60
User manual AXON AX-100 / AX-100 SB
PITCH CENTR
(C-2…G8)
Here you set the pitch that will be your pitch center in your pitch
scale (see above). This is the note that will be played true to its pitch,
from which all the other intervals up and down will be computed.
RESONANCE
(0…63)
Set the strength of filter resonance, the emphasis of the filter cutoff
frequency. Higher values give more emphasis to filter cutoff frequency,
giving a higher point of resonance.
VELO SENSE
(0…7)
Setting this parameter determines how much touch sensitivity (your
playing dynamic) affects resonance.
CUTOFF FREQ
(0…127)
Setting this parameter determines the frequency at which the filter no
longer allows sound. Lower values produce warmer, duller sounds;
higher values produce brighter, crisper sounds.
VEL FEG LEV
(-7…+7)
Setting this parameter determines the velocity sensitivity level… how
much influence touch sensitivity (the various dynamic levels of your
playing) has on the filter envelope. With a value of 0 (zero), velocity
has no effect on the filter envelope. Positive values have increasing
effect on the filter’s effect according to your play velocity. Negative
values cause more filter effect the softer (smaller velocities) you play.
VEL FEG RATE
(-7…+7)
Setting this parameter determines how the speed of the filter is affected
by the various dynamic levels (velocities) you play. Positive values
change the filter faster the louder (harder) you play. Negative values
cause the filter to change faster the softer you play.
