BLUE CHIP
AXON AX-100 GUITAR TO MIDI CONVERTER
48
User manual AXON AX-100 / AX-100 SB
STEP
(1…32)
Using the +/- Value buttons, select the step in the chain you want to
edit. In the display you see the program number of the presently
selected preset for that step.
If you want to add a step in the middle of a chain, simply press the
STORE button on the front panel. A new step is inserted directly after
the selected step and all the following steps are moved one step down
in the chain. When you create a new step, the default settings for the
new step are the same as the step from which you inserted the new
one.
In the same way you can delete a step in the chain by selecting the
one you want to delete and pressing the EDIT button. The step is
deleted and the following steps are moved one up in the chain to fill
the empty spot.
Saving Chain Presets
Press the EXIT button to leave CHAIN MODE. If you have made
changes, the display will flash to remind you that you have not yet
saved the changes. Press the STORE button and your AXON asks
you where (at which chain preset position: 1…32) to store your preset.
Pressing the ENTER button saves your changes. If you don’t change
the preset number, your changes will be written over the preset that
you just edited. You can, of course, save your changes to a different
preset if you may want to save the previous version of the preset for
later use. If you don’t want to save your changes at all, simply press
the EXIT button again.
