Axon AXION AX-100 User Manual Download | Manualshive

Page: 85 / 96

background image

BLUE CHIP

85

User manual AXON AX-100 / AX-100 SB

AXON AX-100 GUITAR TO MIDI CONVERTER

175. FS:Clari+Sax : Preset with fret split. Up to the 9th fret a clarinet
is played. Above that, a saxophone. Pitchbend is quantized to afford
trills using string vibrato.

176. PS:Orgn+Orgn : Preset with 1 pick split. 2 different organ sounds
that can be switched between depending on your pick position. The
split point is approximately in the middle of the pick area.

177. PS:Bass+Bass : Preset with 1 pick split. 2 different bass sounds
that can be switched between depending on your pick position. The
split point is approximately in the middle of the pick area.

178. PS:2xAc.Bass : Preset with 1 pick split. 2 different bass sounds
that can be switched between depending on your pick position. The
split point is approximately in the middle of the pick area.

179. PS:BassVar : Preset with 2 pick splits. 3 different bass sounds
that can be switched between depending on your pick position. The
split points are divided approximately in thirds of the pick area. All
three bass sounds are transposed down one octave.

180. PS:2xGuitar : Preset with 1 pick split. 2 different guitar sounds
that can be switched between depending on your pick position. The
split point is approximately in the middle of the pick area.

181. PS:GuitVar : Preset with 2 pick splits. 3 different guitar sounds
that can be switched between depending on your pick position. The
split points are divided approximately in thirds of the pick area.

182. MS:Strg+Fret : Preset with multi splits. Combination of a string
split and a fret split. The result is four play zones. The three lower
strings play bass sounds; in the lower zone below the 7th fret,an
acoustic bass, in the upper frets above the 7th fret a fretless. The three
higher strings in the lower frets a slap bass, in the higher frets a synth
bass.

183. MS:Strg+Pick : Preset with multi splits. Combination of a string
split and a pick split. The result is four play zones. The three lower
strings near the bridge, a marimba, near the fingerboard, a pad sound.
The three higher strings near the bridge a flute, near the fingerboard
an organ.

184. MS:Fret+Pick : Preset with multi split. Combination of a fret
split and a pick split. The result is four play zones. Near the fingerboard
and in the lower frets a synth sound, above the 7th fret an oboe. Near
the bridge and in the lower frets an acoustic guitar, above the 7th fret
an organ.

«
...
83
84
85
86
87
...
»

Summary of Contents for AXION AX-100

































































































Reviews:

No comments

Related manuals for AXION AX-100

Brand: IDK Pages: 79

Brand: ZIEHL-ABEGG Pages: 26

Brand: IBA Pages: 44

Brand: Walter Pages: 216

Proxeo Ultra PB-510

Brand: W&H Pages: 52

Brand: Baumer Pages: 32

Brand: Digitrax Pages: 8

Brand: Kipor Pages: 18

Brand: Sungrow Pages: 112

Brand: CORNING Pages: 8

Brand: Me Pages: 100

Brand: Woxcon Pages: 23

Brand: Green Cell Pages: 44

Soltection RJ-1

Brand: Vynckier Pages: 12

Brand: Harman Pages: 8

Brand: TICA Pages: 174

Brand: Gomax Pages: 18

Brand: Srne Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands