Axis StorPoint HD User Manual Download Page 87

Page: 87 / 95

Appendix D: Technical Specifications

AXIS StorPoint HD

User’s Manual

AXIS StorPoint HD

SCSI-2, 50 pin female micro-D connector.

AXIS StorPoint HD/T

SCSI-2, 50 pin header.

Compatible

HD drives

Iomegan Jaz Drives Only

Power supply

AXIS StorPoint HD

12V DC

≥

13.2 W, via external power unit (PS-C).

AXIS StorPoint HD/T

Via 4 pin power connector: 12V DC (0.5 A - according to ANSI/IEEE
802.3/1993 used for the AUI connector only) and 5V DC (3 A).

Dimensions

Height: 1.7 in (4.3 cm), Width: 5.9 in (14.9 cm), Depth: 8.8 in (22.4 cm).

Weight

1.5 lbs (0.7 kg).

Environmental

Temperature: 40-105°F (5-40°C).

Humidity: 20-80% RHG, noncondensing.

Approvals

EMC

CE: EN 55022/1994, EN50082-1/1992. FCC Subpart B Class A.

Safety

EN 60950, UL1950. Approved power supply for all countries.

Warranty

3 years. 5 years if a member of the Axis User Group.

All specifications are subject to change without prior notice.

Summary of Contents for StorPoint HD
































































































Search results

Summary of Contents for StorPoint HD

Reviews:

Brands by name

Popular brands

Axis StorPoint HD, User Manual

Search results

Summary of Contents for StorPoint HD

Reviews:

Brands by name

Popular brands