Section 6: Security Management
AXIS StorPoint HD
65
User’s Manual
The following notes may help you when managing access rights:
• The identity of a drive will appear as:
id<x>lun<y>
where
<x>
is the SCSI address and
<y>
the LUN address.
• The name of the Jaz disk when there is no label on the disk,
and no alias name, will be:
nnnnnnnn
, where
nnnnnnnn
is an
unique eight digit number.
• The settings for Jaz disks are stored even if the disc is removed,
so that they are immediately available if the disc is re-inserted.
Settings for typically 56 Jaz disks can be stored in the
StorPoint HD at any time. If the limit is reached, the oldest
settings is discarded when a new Jaz disk is inserted.
• The access settings for a Jaz drive will override the Jaz disk
settings for disks that are inserted in that drive. But this only
happens when an alias name is entered for the drive - if there is
no alias the drive access settings are not used.
7.
Having selected the volume you can now enter the new settings by
editing the parameters shown on the browser page. A general
explanation of the parameters is available in “
” on page 58, and specific information concerning each
network operating system starts on page 71.
8.
Click Submit settings to download the new setting to the StorPoint
HD. The new settings will immediately take effect, and a page will
appear to report the successful change in settings.
9.
Repeat the procedure for each volume as necessary.
