AXIOMTEK IPC960-525 Series, User Manual

Page: 26 / 124

IPC960/IPC962/IPC964-525 Series U
ser’s Manual
Introduction
18
1.7 Jumper Settings
Properly configure jumper settings on the SBC87525 to meet your application purpose. Below
you can find a summary table of all jumpers and onboard default settings.
Note: How to setup Jumpers
Illustrations below show that a cap on a jumper is to
“close” the jumper, whereas that off a
jumper is to
“open” the jumper.
[Open] [Closed] [Pin1 -2 Closed]
Jumper Descriptions Setting
JP2 Clear RTC : Normal Short 1-2
JP10&JP11 DELAY Function SW Short 1-2
1.7.1 Restore BIOS Optimal Defaults (JP2)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this procedure
can restore BIOS optimal defaults.
1.7.2 DELAY Function SW (JP10&JP11)
JP11 JP10 function
2-3 close 2-3 close delay 3s power on
2-3 close 1-2 close delay 6s power on
1-2 close 1-2 close
disable delay function
(default)
Function Setting
Normal operation (Default) 1-2 close
Restore BIOS optimal defaults 2-3 close