AXIOMTEK IPC960-525 Series, User Manual

Page: 41 / 124

IPC960/IPC962/IPC964-525 Series U
ser’s Manual
Introduction
33
The system has two serial ports. COM2~COM3 are RS-232/422/485 ports. Please refer to
Chapter 3 for the detail of BIOS setting.
※
COM2,COM3
The system has two RJ-45 connectors: LAN Ethernet connection can be established by
plugging one end of the Ethernet cable into this RJ-45 connector and the other end (phone
jack) to a 1000/100/10-Base-T hub.
L1 L2 L3 L4 L5 L6 L7 L8
A B
Pins RS-232 RS-422 RS-485
1 DCD, Data Carrier Detect TX- Data-
2 RXD, Receive Data
TX+ Data+
3 TXD, Transmit Data RX+ No use
4 DTR, Data Terminal Ready
RX- No use
5 GND, Ground
No use No use
6 DSR, Data Set Ready No use No use
7 RTS, Request To Send
No use No use
8 CTS, Clear To Send No use No use
9 RI, Ring Indicator No use No use
Pins
1000
Base-T 100/10
Base-T
Descriptions
L1 BI_DA+ TX+ Bidirectional or Transmit Data+
L2 BI_DA- TX- Bidirectional or Transmit Data -
L3 BI_DB+ RX+ Bidirectional or Receive Data+
L4 BI_DC+ N.C. Bidirectional or Not Connected
L5 BI_DC- N.C. Bidirectional or Not Connected
L6 BI_DB- RX- Bidirectional or Receive Data-
L7 BI_DD+ N.C. Bidirectional or Not Connected
L8 BI_DD- N.C. Bidirectional or Not Connected
A
Active Link LED (Yellow)
Off: No link
Blinking: Data activity detected
B
Speed LED
1000: Orange
100: Green
10: OFF