AXIOMTEK IPC960-525 Series User Manual Download Page 120

Page: 120 / 124

IPC960/IPC962/IPC964-525 Series U

ser’s Manual

Configuring SATA For RAID

112

A list of options appears. Please select “Intel RST Premium”.

2.2.

Save and exit the BIOS Setup.

3. Configuring RAID by the RAID BIOS.

Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed if
you do not want to create a RAID.

3.1.

After the POST memory testing and before the operating system booting, a message

"Press

<Ctrl-I> to enter Configuration Utility" shows up. Press <Ctrl + I> to enter the

RAID BIOS setup utility.

3.2.

After you press <Ctrl + I>, the Create RAID Volume

screen will appear. If you want to

create a RAID array, select the Create RAID Volume

option in the Main Menu and

press <Enter>.

Summary of Contents for IPC960-525 Series





























































































































Search results

Summary of Contents for IPC960-525 Series

Reviews:

Related manuals for IPC960-525 Series

Brands by name

Popular brands

AXIOMTEK IPC960-525 Series, User Manual

Search results

Summary of Contents for IPC960-525 Series

Reviews:

Related manuals for IPC960-525 Series

Brands by name

Popular brands