UMAX0608XX‐1000. Tri‐Axial J1939 CAN Inclinometer. Version 9B
Page: 42-66
The following rules apply when converting function block signal data to the CAN output signal
code:
Undefined signals are presented in the signal code with all bits set to 1.
Discrete signals are directly assigned to the signal code without any conversion.
Continuous signals are converted to the signal code based on the
Signal #1…10
Resolution
and
Signal #1…10 Offset
configuration parameters. They are saturated to the
continuous signal code range defined in the J1939 standard when they go out of range.
