![axing EoC 10-01 Operation Instructions Manual Download Page 81](http://html1.mh-extra.com/html/axing/eoc-10-01/eoc-10-01_operation-instructions-manual_3036642081.webp)
2018-06-25 | Technical improvements, changes in design, printing- and other errors expected.
39
5. Specifications
5.1. Network Interface
∂
ITU G.9960 (G.hn over Coaxial Cable)
∂
IEEE 802.3ab 1000Mbps Gigabit Ethernet
∂
IEEE 802.3u 100Mbps Fast Ethernet
∂
IEEE 802.3 10Mbps Ethernet
∂
IEEE 802.3x Flow Control
∂
IEEE 802.3az Energy Efficiency Ethernet
∂
10/100/1000Mbps Auto-Negotiation Support
∂
100/1000Mbps SFP
∂
MDI/MDX Auto-Detection Support
5.2. Network Management
∂
Remote Management by HTTP / TELNET / SNMP Protocols
∂
IPv4 and IPv6 Dual Stack Support
∂
System F/W, EoC Driver, WiFi F/W are Upgradeable via HTTP or TFTP
∂
Auto Configuration via DHCP/TFTP Client
∂
Enable/Disable Endpoint Service
∂
Subscriber Host (PC) Number and MAC Address Control in Endpoint
∂
Diagnosis of EoC Interface
∂
Bandwidth Control
∂
802.1Q Tag VLAN Support
∂
Priority Based on 802.1p, IP TOS/TC or DSCP, and TCP/UDP Port Number
∂
DHCP & IGMP Snooping
∂
Ethernet Statistics and Status
5.3. Transmission Power and Spectrum
∂
4.5 +/- 1 dBm, 6-76MMHz (85MHz Filter)
5.4. Transmission Speed and Range
∂
PHY/Throughput up to 720Mbps
∂
Max Attenuation to Endpoint: 80dB (High Speed within 50dB)
5.5. Connectors
∂
Ethernet LAN Port: 2 Ports, RJ45 Jack
∂
SFP Port: 1 Port for SFP Transceiver
∂
RF+Data (EoC) Port: 1 F-Type Port to EoC Coax Network
∂
RF Port: 1 F-Type Port to TV Set or from CATV/Antenna