Operation Instructions | EoC 10-01 | Ethernet over Coax | Master
8
2018-06-25 | Technical improvements, changes in design, printing- and other errors expected.
2.3. Hardware connections
Select a convenient location for the EoC near the internet modem to which it will be connected. The device
should be kept away from excessive heat.
Please make sure the coaxial network is well grounded.
Use a coaxial cable to connect the EoC+RF port to the feeding in point of the coax network (splitter,
combiner, terrestrial input of a multiswitch etc.).
Optional use another coaxial cable to feed in terrestrial or CATV signals to the RF port.
If you don´t use the RF port, it have to be terminated with the CFA 8-00 terminating resistor.
Connect the LAN1/LAN2 port to the internet modem.
2.3.1. Internet from cable network operator
