Operation Instructions | EoC 10-01 | Ethernet over Coax | Master
22
2018-06-25 | Technical improvements, changes in design, printing- and other errors expected.
3.8. Master Settings
Click on Master row's ‘
Config
’ button (first device row) on the ‘
Devices
’ Window to setup its properties.
3.8.1. Note (G.hn:Note)
Note for the Master (for example a device name).
3.8.2. Coax IP Address and Subnet Mask(G.hn:Coax)
To diagnose the Ethernet over Coax between Master and EP, it is necessary to pre-assign same IPv4 net for
NMU, Master and EP.
3.8.3. Notch Filters(G.hn:Notch)
Include factory default Notches and user defined Notches.
3.8.4. Reset Master to Default (G.hn:Default)
To reset all Master ‘G.hn’ settings to default, includes settings in ‘
Note
’, ‘
Coax
’ and ‘
Notch
’ page.
3.8.5. Apply changes to the configuration (G.hn:ReCfg)
To store the "G.hn" settings of the master; include settings in ‘
Note
’, ‘
Coax
’ and ‘
Notch
’ page.
