Axetris LGD F200P2, Operation And Integration Instructions

Page: 36 / 61

Axetris AG LGD F200P2 Operating Instructions - Rev D 19.09.2018 36/60
The general Command structure for data transmission to the sensor is given in Table 4 , and an example
is given in Table 5 .
Table 4 : General Command structure for data transmission to the sensor.
Byte Value Description
1 “{“ Start of the packet
2 { P C M I S V} Command ID
3 0x08 Size of the packet LSB (least significant bit)
4 0x00 Size of the packet MSB (most significant bit)
5 0xXX Extended command and parameter
0x00 Additional zeros to reach multiple of 8
n -1 Check sum Check sum (sum from 1 to n-1= 0)
n “}” End of the packet
Table 5 : Example of a Command to transmit data to the sensor (Ping user calibration).
Command in Hex 7B 50 08 00 10 00 1D 7D
Command in ASCII { P . . . . . }
Description
Start of packet {
Command (P = ping)
Packet size (here 8 bytes)
Extended command and Parameter (here 10)
Additional zeros to reach multiple of 8
Checksum
End of packet }
Analog to the Command structure, the Response packets have the same general format and are given in
Table 6 , with an example in Table 7 .
Table 6 : General structure of the sensor Response .
Byte Value Description
1 “{“ Start of the packet
2 {S P C M I V} Command ID
3-4 N=Size of the packet Size of the packet (in bytes)
5 Error status Flags [E W x x x x x x] Bit
0
: Error Flag; Bit
1
: Warning Flag.
The other 6 Bits are negligible.
6 Error status Code See Annex A and B
Data
Additional zeros to reach multiple of 8
n - 1 Check sum Check sum (sum from 1 to n-1 = 0)
n “}” End of the packet
Table 7 : Example of a Response from the sensor (Ping user calibration).