SPECIALTY TEST JIGS
AVX-CA-AR1 TEST JIG
The AVX-CA-AR1 test jig has been designed to accept a variety of axial and SQMELF
packages. It has been designed specifically to accept:
1. Microsemi "Type E" axial packages (used in the 1N5418 and other devices)
2. Generic DO-41 packages (used in the 1N5819 and other devices)
3. Microsemi Type A square MELF, also called D-5A (for example, 1N5806US)
4. Microsemi Type B square MELF, also called D-5D (for example, 1N6701US)
5. Microsemi Type E square MELF, also called D-5B (for example, 1N5811US)
To install a DUT, open the main (black) lid like this:
Then open the tan-colored DUT socket by flipping forward the two black latches on the
front edge of it:
30
Summary of Contents for AVR-EB2A-B
