STANDARD TEST JIG MECHANICAL ASPECTS
AVX-CA-AXPOST TEST JIG
One AVX-CA-AXPOST test jig is normally supplied with the mainframe, unless the
customer has requested a different or additional test jigs.
The AVX-CA-AXPOST has easy-to-use spring-loaded push-posts for axial packages
with body length of up to 0.25” (and diameters up to 0.5”), including DO-35, DO-41 and
Microsemi Axial Type E packages (0.185" x 0.135" body, max). Lead bending is not
required to insert these packages.
To install a DUT, open the main (black) lid like this:
Push down on the red and black caps of the anode and cathode posts. This will reveal
slots in the posts where the leads may be inserted. Stop pressing the caps. The leads
will be held in place by a spring-loaded mechanism. The DUT should look like this:
28
Summary of Contents for AVR-EB2A-B
