manualshive.com logo in svg

Avonic AV-CON300-IP, User Manual

Share
Download
Avonic AV-CON300-IP User Manual Download Page 30

OSD menu of the camera

It is possible to use the CON300-IP to call and navigate through the OSD menu of the camera.

LONG Press

 to enter the OSD menu of the camera/ press again to go one level up/ leave OSD

menu.

Navigate through the settings of the OSD menu.

Choose a menu setting.

Leave a menu setting.

Choose a feature of the menu setting.

Change the value of the feature.

Follow instructions below:

1.

Press the menu button 

LONG

 until the controller displays on the screen: "Camera menu

ON/OFF". If the camera is connected (and selected, see 

Camera selection

), the controller will

display the OSD menu of that camera. The Menu button will be light up red and turns off

after a moment. The controller is now ready to navigate the OSD of the camera.

2.

Move the Joystick up and down to navigate through the settings of the OSD menu.

3.

Move the Joystick to the left to choose a menu setting.

4.

Move the Joystick to the right to leave a menu setting.

5.

Twist the Joystick clockwise to choose a feature of the menu setting.

6.

Twist the Joystick anti-clockwise the change the value of the feature.

7.

Press the Menu button to go one level up in the OSD menu, or to leave the OSD menu.

  

User Manual AV-CON300-IP

 | www.avonic.com

30

Summary of Contents for AV-CON300-IP




































Reviews:

No comments

Brands by name

Popular brands

Load more brands