Follow instructions below to select a camera:
1.
Press one of the 5 channel buttons to select the camera or cameras you wish.
2.
If you have multiple cameras assigned to one channel and you wish to control one of these,
press the ADDRESS button to call a list of IP addresses and move the JOYSTICK up and down
to select a specific IP address (camera).
3.
Press the ADDRESS button again to leave this list.
Serial camera selection
Select channel and serial address of the camera
Follow instructions below to select a camera:
1.
Press the channel button to which the camera is connected with.
2.
Press the address button and the NUMBER button to select the IP address of the camera.
Switch between Serial and IP mode
Use the NET button to switch between the serial and IP mode. See picture below:
Serial mode display
In serial mode you will see on the display:
1.
Status of current protocol and address in use.
2.
Actual send/receive status and status of the LAN
connection.
3.
Status of current command.
User Manual AV-CON300-IP
| www.avonic.com
27
