IP Mode Display
In IP mode you will see on the display:
1.
Status of current protocol and IP address in use.
2.
Actual send/receive status and status of the LAN
connection.
3.
Status of current command.
Set, call or delete a preset
With the CON300-IP you can make, call or delete a preset. A preset is an adjustment to the settings of the
CON300-IP that you can frequently use. In most cases this is a specific position of the camera, but if you have
in the menu of the CON300-IP, the controller will remember the status of the
camera (if the camera is set to auto/manual focus, auto/ manual exposure, auto/manual white-balance etc).
Set Preset
Call Preset
Delete Preset
Set (make) a preset
Follow instructions below to set (make) a preset:
1.
Set the camera in the desired position.
2.
Make the desired changes to the focus, exposure or white-balance setting using the CON300-
IP, if you have turned ON the
Real time Refresh
option.
3.
Press SET (button will light up) and the desired NUMBER button. If you want to make
another preset, set the camera again in the desired position, make your changes to the
focus, exposure, or white-balance settings (in case
Real time Refresh
in ON) and press another
NUMBER button.
4.
Press the SET button again (button will light off) to return to the normal operation.
Call a preset
Follow instructions below to call a preset:
1.
Press the NUMBER button of the preset you want to call. The camera will turn automatically
in that position. Looking at the controller, you can see if you have turned on auto focus,
exposure and/or white-balance. These buttons will light up if this is the case.
Delete a preset
Follow instructions below to delete a preset:
1.
Press RESET (button will light up) and the NUMBER button of the preset you want to delete.
2.
Press RESET button again (button will light off) to return to normal operation.
User Manual AV-CON300-IP
| www.avonic.com
28
