Unpacking the Controller
Execute the following steps to unpack the CON300-IP and associated components:
1.
Open the box.
2.
Verify that the contents of the box exactly matches the items as described in
on page 12.
If this is NOT the case, contact Avonic and stop here.
The CON300-IP should be in its protective foam as follows:
CON300-IP in box
CON300-IP Accessories (PSU and RJ45 cable)
3.
Verify that the plastic bag is sealed. If this is NOT the case, contact Avonic and stop here.
4.
Break the seal of the sealed bag.
5.
Take the CON300-IP out of the bag.
6.
Install the CON300-IP following the steps as described in the chapter
on page 14
Return Procedure
If, for any reason, you have to return the camera to Avonic, Execute the following steps:
1.
Place the CON300-IP back in its protective foam.
2.
Place the CON300-IP with
all
of its components in the box.
3.
Verify that the contents of the box
exactly
matches the items as described in
.
4.
for the Return Procedure.
User Manual AV-CON300-IP
| www.avonic.com
13
