Shortcuts
With the CON300-IP it is possible to make some adjustments to the settings of the camera(s) by using only
one or two buttons on the controller. Read below to see what the CON300-IP is capable of.
PTZ Operation and (Zoom) Rocker Button
Pan, tilt to move the camera in every position.
Zoom in and out.
Press to set the camera in home position.
Zoom in and out when moving the camera.
Finetune PTZ speed (how fast the camera will move).
Follow instructions below:
1.
Move the joystick in every direction to move the camera in a specific position.
2.
Twist the joystick to zoom in and out.
3.
Press the button on the joystick to set the camera in home (default) position.
4.
If you want to zoom in and out while moving the camera, press the (zoom) Rocker button
and move the joystick at the same time.
5.
Turn the PTZ speed knob to change the speed how fast the camera will move.
Camera selection
The selection of a camera or multiple cameras depends on communication protocol that is used by that camera
or cameras. See
in the menu of the CON300-IP.
Before you can select a camera, you need to assign first a camera to a specific channel and/or address.
This can be done in the menu of the CON300-IP. See the links above.
IP camera selection
Press to select a channel to which the cameras is assigned.
Select the camera from a list of IP addresses.
User Manual AV-CON300-IP
| www.avonic.com
26
