Joystick control
With the joystick it is possible to move (pan/tilt) the camera(s), but you can also use the joystick to navigate in
the menu of the controller itself. See the table below:
Joystick control
Functionality
Scroll through the menu, the menu features, or feature values
Enter a menu feature
Left the menu feature/ or left the CON300-IP menu
Zoom in/ Enter a menu feature
Zoom out/ left a menu feature
When any value has changed, press to enter the value
1.
Enter CON300-IP Menu
2.
One press to go one step back in the Menu (in CON300-IP menu mode)
3.
Another press to save the settings and exit the Menu
First Start
Follow instructions below when you want to start the CON300-IP for the first time:
1.
The controller has a physically ON and OFF switch at is back. Switch this button to ON.
2.
The screen on the controller will light up. Press the
key.
3.
In the menu move the
until you see
Ethernet
. Click the
enter this setting.
4.
Move the joystick up and down to select IP address and click the joystick button to enter.
5.
Enter the IP address you want to give for the CON300-IP and click the joystick button to
confirm.
6.
Leave the menu of the controller. The IP address will automatically saved. See also
Figure 9: Example of the Ethernet settings
User Manual AV-CON300-IP
| www.avonic.com
20
